The Sani Dry dehumidifier is made by Therma-Stor exclusively for a company called Basement Systems. Basement Systems is a company that supplies and installs dehumidifiers with their own licensed contractors. They also offer basement finishing and repair services.

The Sani Dry dehumidifier model called the XP Dehumidifier works well in a large area up to 2,500 square feet. It can remove 109 pints of water, per day, from the air of your home making your home much more comfortable to live in and reducing the amount of damage that can be caused by excess moisture.

This unit is also capable of functioning at low temperatures down to 40 degrees. What this means is, if your basement is cool the coils have an auto-defrost feature to keep the unit from freezing up and shutting itself off. It will continue to operate at these low temperature and keep your home moisture free.

Editor Note: Click here for more free info about Dehumidifier

The unit can either be used as a free standing unit or can be installed directly into the ductwork of your home. If you are the handy type you could probably manage the installation on your own but if not then they will install it for you.

The XP is Energy Star rated so it is energy efficient and will not increase you energy bill by any significant amount.

The convenience of the unit is also a plus. There is no bucket to empty every day, the XP drains directly to a floor drain. If there is no drain in the floor, you will need to drain the water up and out by purchasing what is called a “compensate pump” separately and installing it in the unit.

The XP has an adjustable “humidistat” as well, allowing you to set the desired relative humidity of your home anywhere from 20% to 90%. Those settings are most extreme and you most likely will set the XP unit in the range of 35% to 50% to be comfortable in your home.

Note: If you’re looking to buy Sani Dry Dehumidifier then we can tell you How to get it at the cheapest price etc, etc Click Here to Buy

If you suffer from allergies you will notice a big difference in the severity of your symptoms once the XP is installed and begins to remove the excess moisture in your home.

Once the XP is installed, it will run until it achieves the level of humidity in your home that you have set then it will maintain that level by cycling on and off. It might take 24 hours or more to reach the level you want for your home.

Once the XP is programmed by you with specific data for your home, it will always remember it. Even if there is a power outage the XP will restart automatically and remember the settings you programmed into it.

As I stated earlier, the unit can handle up to 2,500 square feet. So, if the entire square footage of your house does not exceed that number then you can install the unit directly into the ductwork of your home and dehumidify your entire house.

The Sani Dry dehumidifier is solely capable of maintaining the moisture in your home to reduce allergens and keep the excess moisture from causing structural damage.